• Home >
  • International Journals On Concrete Fine Aggregate Replaced W

crushers and mills

International Journals On Concrete Fine Aggregate Replaced W

Study on Concrete with Replacement of Fine Aggregates

 · characteristics of a good quality aggregate include resistance to abrasion, resistance to freeze/thaw action, resistance to sulfates,.fine aggregates are replaced with vermiculite and its compressive strength, tensile strength and flexural strength.Studies on Viability of Using Geosynthetics as Fibres in Concrete” International .

Abrasion Resistance of Fine Aggregate-Replaced

This investigation evaluates the resistance to abrasion of concrete proportioned to have four levels of fine aggregate replacement (5, 10, 15, and 20 percent) with silica fume, a byproduct of the silicon metal and ferrosilicon industry.

Experimental Study of Partial Replacement of Fine .

 · International Journal Of Computational Eng.protecting the environment form pollution This paper deals with partial replacement of fine aggregate with the industrial waste.The compressive strength, split tensile strength and flexural strength of conventional concrete and fine aggregate replaced concrete are compared and the results are .

Effect of Strength Properties on Concrete by Partial .

Rajendra D, H Gokulram "Effect of Strength Properties on Concrete by Partial Replacement of Coarse Aggregate with Waste Cuddapah Stones", International Journal of Engineering Trends and Technology (IJETT), V44(5),221-223 February 2017. ISSN:2231-5381. ijettjournal.org. published by seventh sense research group. Abstract Cement, fine aggregate, coarse aggregate and water are important .

Use of Recycled Aggregate Concrete - IOSR Journals

 · 40% is of fine aggregate. As per recent research by the Fredonia group, it is forecast that the global demand for.cement could be offset by the lower cost of Recycled Concrete Aggregate (RCA)..USE OF RECYCLED AGGREGATE CONCRETE Second International Conference on Emerging Trends in engineering (SICETE) 55| Page Dr. J.J. Magdum College of .

Effect on Partial Replacement of Fine Aggregate and

 · aggregate and as a fine aggregate passing through 1 mm sieve. Baboo Rai et al (2011) [4] conducted the study on cubes of mortar (1:3) with varying partial replacement of cement with the same amount of WMP and tested at

Strength Properties of Concrete Using Crumb Rubber

However, in this study the crumb rubber is partially replaced with fine aggregate and test the strength under compression. The compression strength of the concrete at

Use of Quarry Dust to Replace Sand in Concrete – An .

 · International Journal of Scientific and Research Publications, Volume 3, Issue 12, December 2013 1.The constituents of concrete are coarse aggregate, fine aggregate, binding material and water. LIMING increase in.replaced partially or fully with or without concrete admixtures.

REPLACEMENT OF AGGREGATE BY C&D WASTE

concrete is a mixture of fine aggregate, coarse aggregate, cement and water is the major source of construction in day today life. All types of structural elements such as beams, columns, slabs .

Application of Waste Foundry Sand for Evolution of Low .

 · application of waste foundry sand to various.CONCRETE MIX DESIGN (M25 grade) Sr no. w/c Type of concrete C Concrete mix design proportion ratio FA CA WFS 1. B0 0.40 1 1.01 2.50 - 2. B2 0.40 1 0.81 2.50 0.20.Type of concrete Fine aggregate replaced by waste foundry sand 1. B0 Traditional concrete

Research Paper EFFECTS OF SUSTAINABLE MATERIALS AS

 · and Copper Slag as replacement for cement and fine aggregate simultaneously were studied. The Metakaolin replacement at 5,10, 15, 20 and 25 % and GGBS replacement at 5,10, 15,20 and 25 % by the weight of cement were used respectively.

International Journal of Engineering Trends and

 · International Journal of Engineering Trends and Technology (IJETT) – Volume 14 Number 2 – Aug 2014.that is cementitious and binds the aggregate together in concrete and Ca(OH) 2 The C-S-H formed by the reaction be-.zone III of Is 383-1970 was used as a fine aggregate. Well

REPLACEMENT OF AGGREGATE BY C&D WASTE

concrete is a mixture of fine aggregate, coarse aggregate, cement and water is the major source of construction in day today life. All types of structural elements such as beams, columns, slabs .

Use of Quarry Dust to Replace Sand in Concrete – An .

 · International Journal of Scientific and Research Publications, Volume 3, Issue 12, December 2013 1.The constituents of concrete are coarse aggregate, fine aggregate, binding material and water. LIMING increase in.replaced partially or fully with or without concrete admixtures.

Utilization of Waste Foundry Sand as Partial Replacement .

 · this investigation, fine aggregate has been replaced by foundry sand accordingly in the range of (10-60% at the interval of 10%). Concrete mixes were cost and tested for workability and compressive strength.

International Journal of Engineering Research and General .

 · International Journal of Engineering Research and General Science Volume 3, Issue 3, May-June, 2015.Zheng et al. 2008 worked on rubberized concrete and replaced the coarse aggregate in normal concrete.Taha et al. 2008 used chipped tyre rubber and crumb tyre rubber to replace the coarse and fine aggregate respectively in the concrete at .

Shrinkage of Concrete with Replacement of Aggregate

 · Aggregate with Recycled Concrete Aggregate By José Manuel Gómez-Soberón*.He has published numerous papers on the area of Recycled Concrete in International Journals and Conferences and works as Collaborative Teacher and.(both coarse and fine fractions) are replaced by RCA, increases in shrinkage may even reach 100%. Other research, .

Replacement of Cement in Concrete

 · Determine the percentage of fine aggregate in total aggregate by absolute volume from table for the concrete using crushed coarse aggregates. Adjust the values of water content and percentage of sand as provided in the

Utilization of Ceramic Waste and used Foundry Sand in

 · waste powder and used foundry sand in concrete. Ceramic waste powder is replaced with cement at a rate of 0%, 10%,.concrete mix with partial replacement of cement and fine aggregate with a w/c ratio as 0.50. After 24 h the specimens.Utilization of Ceramic Waste and used Foundry Sand in Concrete

(PDF) Strength Characteristics of Quarry Dust in .

 · The replacement of natural fine aggregate by using quarry dust leads to consumption of generated quarry dust, the requirement of land fill area can

Experimental Behavior of Reinforced Concrete with Partial .

 · Mix design has been arrived for M25 concrete with replaced by the different ratios of 50%, 60%, 70% & 80% of GGBS slag. Fineness modulus, specific gravity, sieve analysis and.To arrive optimum percentage of w/c ratio and super.83:1963.Local river sand was used as fine aggregate in the concrete. Aggregate comply with the requirements .

Early age shrinkage pattern of concrete on

This is an experimental work carried out to investigate early age shrinkage pattern of concrete, prepared, on 50% replacement of industrial by-product (like pond ash and granulated blast furnace slag) as fine aggregate using OPC, PPC and PSC as a binder.

Experimental Investigation on the Effect of Replacement

 · obtained with the use of river sand as fine aggregate. Based Experimental Investigation on the Effect of Replacement of Sand by Quarry Dust in Hollow Concrete Block for.replaced W/C ratio Admixture C SA QD CA SA QD CA percentage HCB4 1C:4.8S:0QD:7.2CA 1 4.8 0 7.2 40 0 60 00 0.55

Use of Quarry Dust as fine aggregates by Partial .

 · The concept of replacement of natural fine aggregate (sand) by quarry dust may help in many ways such as it is helpful to control environment pollution, erosion of river

EXPERIMENTAL INVESTIGATION ON PARTIAL

 · INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH.Higher compressive strength was found with 10% natural fine aggregate replaced concrete. KEYWORDS: Waste plastic fibers, workability, compressive strength,.we made M30 grade concrete with w/c of 0.40. Workability, dry density properties, compressive strength, .

Shrinkage of Concrete with Replacement of Aggregate

Shrinkage of Concrete with Replacement of Aggregate with Recycled Concrete Aggregate.the natural aggregate were replaced with recycled.area of Recycled Concrete in International Journals .

Partial Replacement of Fine Aggregate with GGBS

 · GGBS partially replaced in concrete in step of 20% (0%, 20%, 40% and 60%). For each percent of marble powder replacing Cement, three cubes & two cylinders were casted for 28 days.

STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE

 · reference mix for the third stage. In stage3, fine aggregate is partially replaced with recycled plastic granules by 4%, 8% and 12%. Compressive strength, split tensile strength.Concrete as Fine Aggregate”, International Journal of Research in Engineering and Technology (IJRET), ISSN: 2319-1163, 2013..Cement w u grade”, Bureau of .

Effect of Silica Fume on Concrete Containing Copper Slag .

 · International Journal of Research in Advent Technology (E-ISSN: 2321-9637) Special Issue.Portland cement is replaced with silica fume at 0, 4, 8 and 12 % and fine aggregate is replaced with copper slag at 0, 20, 40 and 60 %..cement by silica fume for M30 grade concrete. Fine aggregate was partially replaced with copper slag at 0, 20, 40 .

Recycling concrete as fine aggregate in concrete .

The International Journal of Cement Composites and Lightweight Concrete, Volume 9, Number 4 November 1987 Recycling concrete as fine aggregate in concrete R. Sri Ravindrarajah * and C. 7-. Tam * Synopsis Increasing shortage of natural aggregates for concrete in urban areas leads to a search for aggregates from new sources.

Partial Replacement of Fine Aggregate with GGBS

 · GGBS partially replaced in concrete in step of 20% (0%, 20%, 40% and 60%). For each percent of marble powder replacing Cement, three cubes & two cylinders were casted for 28 days.

Effect on Partial Replacement of Fine Aggregate and

 · aggregate and as a fine aggregate passing through 1 mm sieve. Baboo Rai et al (2011) [4] conducted the study on cubes of mortar (1:3) with varying partial replacement of cement with the same amount of WMP and tested at

Strength Development Models of Concrete with Silica

 · which fine aggregate was partially replaced with silica fume. Mathematical models were developed using statistical techniques to predict the compressive strength of such concrete.

Effect of replacement of natural sand by manufactured

 · concrete, so fine aggregate is an essential component of concrete and cement mortar. The.International Journal of Civil and Structural Engineering 622 Volume 3 Issue 3 2013 Amnon and Hadassa, 2006: studied the effect of high levels of fines content on concrete.w/c=0.5 Mortar mix proportion 1:2,w/c=0.55 Compressiv e strength MPa (ksi .

Journal of Engineering Effects of Silica in Rice Husk Ash .

 · International Journal of Engineering and Technology Volume 2 No. 12, December, 2012.Coarse and fine aggregate were tested for its particle size.based on the initial weight of concrete specimens before immerse (W 0) and the weight after immerse (W 1)

A study on characterization and use of Pond Ash as fine .

 · International Journal of Civil and Structural Engineering Volume.W t. of conc kg/m 3 7 days.The strength o f concrete when fine aggregate is replaced with pond ash also .

Experimental Behavior of Reinforced Concrete with Partial .

 · Mix design has been arrived for M25 concrete with replaced by the different ratios of 50%, 60%, 70% & 80% of GGBS slag. Fineness modulus, specific gravity, sieve analysis and.To arrive optimum percentage of w/c ratio and super.83:1963.Local river sand was used as fine aggregate in the concrete. Aggregate comply with the requirements .

Effect of Silica Fume on Concrete Containing Copper Slag .

 · International Journal of Research in Advent Technology (E-ISSN: 2321-9637) Special Issue.Portland cement is replaced with silica fume at 0, 4, 8 and 12 % and fine aggregate is replaced with copper slag at 0, 20, 40 and 60 %..cement by silica fume for M30 grade concrete. Fine aggregate was partially replaced with copper slag at 0, 20, 40 .

STUDY ON REPLACEMENT OF COARSE AGGREGATE BY E-

International Journal of Technical Research and Applications e-ISSN:.the type of fine aggregate used. IS method of concrete mix was.Mix proportions were arrived and E-waste was added to the concrete mix with a w/c ratio 0.5. the percentage of E-waste added by weight was 0, 5 ,10 ,15 and 20. Control mix concrete

EFFECT OF COAL BOTTOM ASH AS SAND REPLACEMENT

 · Effect of coal bottom ash as sand replacement on the properties of concrete with different w/c ratio International Journal of Advanced Technology in Civil Engineering, ISSN: 2231 –5721, Volume-2, Issue-1, 2013.fine aggregate in concrete. The thermal power plants.Effect of coal bottom ash as sand replacement on the properties of .

Use of recycled fine aggregate in concretes with

The compressive strengths of concretes made with 20% and 30% of recycled fine aggregate are similar to those of concrete made with 100% of natural fine aggregates. This fact can be attributed to the lower effective water/cement ratio of RC concretes respect to the CC concrete.

International Journal of ChemTech Research - sphinxsai

 · part of cement, 50% of fine aggregate (1.5) and 50% of coarse aggregate(1.5) was kept equal initially, later the fine aggregate was increased more than coarse aggregate content, to develop the flow characteristic of SCC.

Re-Use of Hospital Plastic Waste in Asphalt Mixes as .

 · Natural aggregate were replaced up to 25% (by volume) with 5% incremental increase as shown in Figure 3(b). Trial mixes were made to find the optimum binder content that came out to be 4.5%. Trial mixes were made to find the optimum binder content that came out to be 4.5%.

Recycling of PET bottles as fine aggregate in concrete .

It was found that the 28-day compressive strength of concrete containing 25% of WPET by volume of total mixture as fine aggregate is reduced of about 6% compared to that of control concrete possessing a water/cement ratio (w/c) of 0.73 and of about 9% relative to concrete possessing a w/c of 0.45.

Influence of Recycled Concrete Aggregate and Crushed

aggregate was replaced with CCB at 20% high level and 10% low level; coarse aggregate was replaced with RCA at 30% high level and 15% low level and the curing days (CD) for concrete

Study on Compressive Strength of Quarry Dust as

 · The availability of sand at low cost as a fine aggregate in concrete is not suitable and that is the reason to search for an alternative material. Quarry dust satisfies the reason behind the alternative material as a substitute for sand at very low cost.

Experimental Studies on High Strength Concrete by using .

 · A 50% replaced mix with reduced w/c ratio was also tested. From the experimental investigation it was found.w/b ratio 0.22 to 0.40 Fine aggregate - Smaller sand content or coarser sand.aggregate. Thus concrete with recycled aggregate may require more mixing water to

Strength and Wear Resistance of Sand-Replaced

The American Concrete Institute. Founded in 1904 and headquartered in Farmington Hills, Michigan, USA, the American Concrete Institute is a leading authority and resource worldwide for the development, dissemination, and adoption of its consensus-based standards, technical resources, educational programs, and proven expertise for individuals and organizations involved in concrete design .

Experimental Study on Sea Sand by using Partial .

 · In this project Sea sand was collected from kalpakkam beach and it was added to the concrete as a partial replacement of Fine Aggregate in the proportion 0%, 20%, 40%, 60% to find out the behaviour of sea sand in concrete under compressive strength test